Up
|
G-PEM4311 Arbitrary Waveform Generator Module is an embedded arbitrary waveform generator module based on PC104 bus. It is especially applicable for the user to develop measurement & control instrument product with special application. It may generate routine waveforms such as sine wave, square wave, saw-toothed wave, pulse wave and noise to realize frequency modulation and amplitude modulation. In addition, G-PEM4311 Arbitrary Waveform Generator Module can output appointed waveform document by user or generate waveform with mathematical expression. G-PEM4311 Arbitrary Waveform Generator Module adopts DDS, FPGA and SRAM. The DDS CORE controller drives to generate arbitrary waveforms with output repeat frequency range from 0.02Hz to 5MHz with 0.02Hz adjusting step. High-speed swept output driven by software may generate the output effect of FM/AM. The users can embed G-PEM4311 Arbitrary Waveform Generator Module to target system to carry on development. G-PEM4311 Arbitrary Waveform Generator Module can be widely used at various situations that need all kinds of complex signal sources or excitation sources. It can be used in these field such as automatic measurement & control system, communication system test, product test in product line, frequency feature test and laboratory simulation. Therefore, it has excellent integration, frequency resolution, reliability, stability and performance-price ratio. * Waveform frequency (Hz): 0.1 (DC)~5M * Input channel: Single channel * Output impedance: 50Ω * Mode of input signal: Q9 solitary port * Frequency resolution: 0.02Hz * Frequency stability: <50ppm * Waveform memory depth: 64ksa/CH * Waveform reappear: 1~4G or series * Sweep mode: linear up, down * DC accuracy: setting value0.2% * Harmonic distortion (sine wave non-linear distortion): (10Hz~500kHz) -56dBc (500kHz~5MHz) 56dBc+20log(f/500k) * External reference clock input: 1MHz~60MHz TTL signal * Triggering: external triggering or soft triggering * Provide DEMO source code under common development platforms and technical support for development * Operating Temperature: 0℃ to 40℃ * Storage Temperature: -40℃ to 60℃ * Relative Humidity: 40℃ 20 to 90% (no condensation) You must have a return authorization number to return your product. Please contact support@GAOTek.com to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact support@GAOTek.com to obtain an authorization number. |