Up
|
GAOHNC-300LT series Hall effect current sensor is a new generation of current Hall sensors to measure the conditions in isolated DC electricity, communications, and various irregular pulse waveform of the current. Electrical parameters (Ta=25 degrees) Models HNC-50LT HNC-100LT HNC-200LT HNC-300LT * If 50A DC current measurement rated 100A.DC 200A.DC 300A DC * Linear scope 0~+75A DC 0~+150A DC 0~+300A DC 0~+500A DC * Turns than 1:1000 1:2000 1:2000 1:2000 * If 50mA+0.6% at Ih50mA+0.8% at current export If 100mA+0.5% at zero current imbalances If 150mA+0.5% a volcano within + 0.2 mA at If=0 * Linear error within who +0.1% of Ih at If=F.S +15V DC supply voltage Vcc +5% * Response time Trr < 1 s 0.1 Wenpiao +0.2mA within Max mA at +0.6% Type If=0 * Cizhi error within + 0.2 mA (If>0) * Selection of load resistor RL Europe home 80 80 ohm 40 Europe home mother 26.67 Europe home * Insulation voltage 3KV AC with 50 or 60Hz x 1 minute * Insulation strength 500M @ Island Min at 500V DC * Bandwidth f DC-100KHZ (-3dB) * Working temperature Ta -10 degrees to +80 degrees * Storage temperature of -15 degrees to +85 degrees Ts * Hall applied the principles loop (Compensation) current sensors * Strong anti-interference capability * Exchange frequency conversion mechanics, servo electrical You must have a return authorization number to return your product. Please contact support@GAOTek.com to obtain an authorization number, which shall be valid for 14 days after issued. This product is covered by a warranty of 12 months. You must have a return authorization number to service your product. Please contact support@GAOTek.com to obtain an authorization number. |