Up
|
* High-sensitivity X-Y mode using CH1 as the Y axis and CH2 as the X axis * Auto-freerun for displaying a trace even without signal input * Up/down and left/right waveform display * 0 phase and Lissajous pattern * Convenient dual triggering * Automatic CHOP/ALT switching in interlocking with the sweep rate * Simultaneous dual-trace and Lissajous waveform display * Close-up bezel for facilitating waveform photography 150mm rectangular, with internal graticule Vertical amplifier (Common for CH1 and CH2) Dual-H :left/right dual-trace CHOP operation with the SWEEP TIME/DIV. 1ms or less. ALT operation with the SWEEP TIME/DIV. 0.5ms or more. Phase display is possible simultaneous with the lissajous pattern. For the X-Y display mode, the 0°phase waveform may also be simultaneously displayed. 1-2-5 steps, 10 ranges and fine adjustment. Maximum input withstand voltage X-Y mode is selectable using the mode switch. Maximum input withstand voltage 0.5µs/div to 0.5s/div ±3% in 1-2-5 steps, 19 ranges and fine adjustment. DUAL :Automatic selection of CH1 and CH2 as the sync input. Maximum input withstand voltage DUAL, CH1, CH2 :0.5div (50Hz to 3MHz) Square wave, positive polarity 100Hz or 120Hz (double line frequency) Semi-fixed controller on the front panel. AC 100V/120V/220V/230V ±10% 85% or less (no condensation) Accessory cables model CA-41 (2), |