Up
|
(220-0167) Specifications Faxback Doc. # 8203 Display: .................................................. 33/4 digit, LCD Maximum Frequency: .......................................... 2 KHz +/- 12% 300 mV-3V: .................. +/-0.5% of reading and +/-0.2% of full scale, +/-1 in last digit 30-300-1000V: ............... +/-1.0% of reading and +/-0.2% of full scale, +/-1 in last digit (Maximum Measurement = 1000 Volts) 3-30-300-750V: ............... +/-1.2% of reading and +/-0.5% of full scale +/-1 in last digit (Maximum Measurement = 750 Volts RMS) 300 uA/30 mA: .................. +/-1.0% reading and +/-0.2% of full scale, +/-1 in last digit 3000 uA/300 mA: ................ +/-1.5% reading and +/-0.2% of full scale, +/-1 in last digit 10 A: ....................... +/-2.0% of reading and +/-0.2% of full scale, +/-1 in last digit 300-3000 uA -30-300 mA: ............................ +/-2.5% of reading and +/-0.5% of full scale, +/-1 in last digit (Maximum Measurement = 300 mA) 10 A: ....................... +/-2.5% of reading and +/-0.5% of full scale, +/-1 in last digit 300 ohms -3-30-300 kOhms: ... +/-1.0% of reading and +/-0.2% of full scale, +/-1 in last digit 3 MOhms: .................... +/-2.0% of reading and +/-0.2% of full scale, +/-1 in last digit 30 MOhms: ................... +/-3.5% of reading and +/-0.5% of full scale, +/-1 in last digit Range: ............ Full auto range or manual range control for voltage and resistance measurements. Semi-auto and manual range for current measurements. Polarity: ..................... Automatic, Minus sign for negative polarity Input Impedance: .................................... 10 Meg Ohm (VDC/VAC), more than 100 Meg Ohm on 300 mV DC Continuity Function: .. Continuity buzzer sounds at less than about 20 Ohms Low Battery Indicator: ............ "-[+ / -]" appears when battery voltage drops below operating voltage. Over-range Indication: ....................... 0.L. appears on the display. Use care for 1000 VDC, 750 VAC, and DC/AC 10A ranges, as exceeding the maximum limits of these ranges can damage the meter and prevent an over-range indication. Operating Temperature: ............................... 32 to 122 degrees F. (0 to 50 degrees C) Storage Temperature: .................................. 4 to 140 degrees F. (-20 to 60 degrees C) Power Source: ............................................ Two AA Batteries Power Consumption: ......................................... 5 mW (Typical) Dimensions: ................................. 3 1/16 X 6 1/2 X 1 3/8 Inches (78 X 165 X35 mm [WHD]) Weight: ..................................................... 20 Oz (566 g) Accessories: ......................................................... Fuse Test leads with 90 degree plug Holster |